 鲜花( 0)  鸡蛋( 0)
|
Time / System Time Time / system time
# G, J- Z) i9 O& z. q6 m Date / System Date Date / system date 9 ^% V8 t! ?& o, v# Y) E
Level 2 Cache secondary cache
9 R K& N7 h4 O3 a( a System Memory System Memory
% H- C, \$ X) I% C* S9 @/ X Video Controller Video Controller
; y( }+ x& T# \" ~; z6 U Panel Type LCD Model 0 ]0 d( f# ~- `7 X6 @- S$ u6 q
Audio Controller Audio Controller
% M+ K! e3 D& S2 _9 q; t Modem Controller Modem (Modem) ) X0 s" w- e4 i. j! b6 H) o2 a
Primary Hard Drive primary hard
8 k" g+ S2 _4 B1 I Modular Bay module bay
4 u3 N% w: q& X; N Service Tag Service Tag
( ?0 { v4 x8 m$ l# ?% t' Q Asset Tag Asset Tag
1 o& l- G5 M/ Q0 ` BIOS Version BIOS Version
5 U) y7 b/ c; [4 ^) @% B. { Boot Order / Boot Sequence Boot Sequence (operating system, file system search order)
! ^; c& \" w$ ?; I9 N( y Diskette Drive Floppy Drive . E* l5 L5 {" i$ O0 J
Internal HDD built-in hard disk drive floppy device ( p: d5 n8 R" g/ m
0 K* I6 K; s# N Y+ L: j
Floppy device Hard-Disk Drive Hard Drive
2 m% S2 V9 Z" G2 |8 j USB Storage Device USB storage device
2 I+ L: g5 b5 P7 G; {2 K. b CD / DVD / CD-RW Drive CD-ROM % `$ [: C, U/ [1 H7 B4 t
CD-ROM device drive
7 T9 _8 i* J! j" C7 ~2 J/ _ Modular Bay HDD modular hard drive ( V$ L. ]5 c' x" [1 h
Cardbus NIC Cardbus bus card , H- P+ n/ E8 [, n+ u8 q4 \2 {: Q
Onboard NIC Onboard LAN , G: x* M7 e' k D) \8 w
Boot POST 8 Y" @% h! b3 o
when the Power On Self Test (POST) check the hardware level: set to , memory module changes or previous POST did not complete the case to be checked. is set to to set the system to use a lower voltage power adapter or other configuration is not supported by the alarm, set to : Use this option to enable or disable the built-in Modem. disabled (disabled) after the Modem is not visible in the operating system.
0 k8 w$ E+ e; u! R& y) G, f7 W LAN Controller . n" S* z$ I) T% X
Network Controller: Use this option to enable or disable PCI Ethernet controller. disabled the device in the operating system is not visible.
9 J6 K, n8 a* _ O0 H' u2 L) [/ P PXE BIS Policy / PXE BIS Default Policy 1 e' @, H8 K. Z8 N! O0 u8 J" v' F
PXE BIS Policy: This option controls how the system without authentication processing (start the overall service Boot Integrity Services (BIS)) authorization requests. BIS system can accept or reject the request. is set to Equipment
: W: A& a8 B3 l& I MiniPCI Device Mini PCI device 7 d6 s8 S# L6 e5 U$ f) p4 ^/ \ e; y: m
MiniPCI Status Mini PCI Device Status: The installation of Mini PCI device can use this option to enable or disable the onboard PCI devices
# _% }9 P, d- P; j5 B! ^: T Wireless Control
. T0 ]8 C5 _, H y% c. @ wireless control: the use of the options can be set MiniPCI and Bluetooth wireless device control mode. is set to through the item to enable or disable wireless devices. The settings can be in the operating system through the options can be re-assigned port address or disable the port to avoid resource conflicts equipment.
+ O1 o8 o$ B6 p2 [ Infrared Data Port infrared data port. Use this setting can be re-assigned port address or disable the port to avoid resource conflicts equipment.
& s( t0 k4 E, Z Parallel Mode 2 D. j" _' t$ b1 Q( m- T
parallel mode. control the computer parallel port works as ) or ; the digital lights remain off, set to
( d, C4 Z5 V7 v Enable Keypad
q" l! B- A) O5 Q% p% U enabled keyboard: set to disabled.
3 L- T5 [3 I* U O External Hot Key
+ |$ H' l! Z, T& F external hotkey: This setting can be an external PS / 2 keyboard in accordance with the use of laptop computers use the same key button. If you use the ACPI operating system, such as Win2000 or WinXP,mini usb drive, the USB keyboard can not use the key. only in pure DOS mode, can use USB keyboard keys. is set to
) u7 S2 f, S' D1 Y+ |% ~3 \ USB Emulation
8 Z# V9 i# s4 z3 o# {! y USB Simulation: Use this option may not directly support the operating system to use USB USB keyboard, USB mouse and USB floppy drive. The setting in the BIOS boot process automatically enabled. enable this feature,stator, control is transferred to the operating system simulation remain valid. to disable the feature in the control simulation of the transfer to the operating system shut down.
# q1 _. n) Q7 j# s' v9 W Pointing Device
( ^$ |" N) g4 Z+ T' J pointing device: setting board is disabled. set to 2 mouse,led display, you can switch between mouse and touch pad. changes take effect after the computer restarts. / g2 A6 a/ M( l' m8 J8 T$ q
Video Expansion
8 m+ N2 J# t2 X) q. o" v Video Extension: Use this option to enable or disable video extensions, will be adjusted to a lower resolution higher,2010-2015 China floppy drive competition in the industry analysis and Investment Planning, Forecast ..., the normal LCD resolution.
% \) |, G2 f/ y: z }2 Z K Z Battery Battery
) i, B6 w) `4 j2 m: @2 \$ P Battery Status Battery Status
, {; c% Q3 Y4 a3 [0 u. S9 j Power Management Power Management 4 ^- _$ A* U0 S. T9 n% `
Suspend Mode suspend mode
2 ^1 g3 D) H6 W' G9 b9 N AC Power Recovery AC power recovery: this option AC power adapter can be re-inserted back into the corresponding reflection of the computer system. 2 s' \( P8 z3 h
Low Power Mode Low power mode: This option is used to set the system sleep or shut down the power consumption. 9 {- L4 J* q$ }5 ^' P* ^
Brightness
4 k% H/ B/ c, J$ k$ E brightness: the option to set the brightness of the monitor when the computer starts. computer work when the power supply state, the default is set to half. computer work in the AC power adapter is set by default when the state's largest.
! t# W1 w- V, O7 x Wakeup On LAN
7 f- x) S. N& z7 | Wake on LAN: This option allows access to the network signal when the computer wakes from sleep. The setting of standby mode (Standby state) is not valid. only to wake up in the standby operating system. This setting is only an exchange in the next valid when the power adapter.
& v. B* G2 B- ~. l- i) M Auto On Mod Auto boot mode: Note that if the AC power adapter is not connected, this setting will not take effect. This option can be set to automatically boot the computer time, you can set your computer to automatically start each day or only on weekdays automatically boot. setting takes effect after the computer restarts. 5 p1 f- c+ D% S" e+ ?
Auto On Time automatically start time: This option can be set to automatically boot time, a 24-hour time format. Type the value or use the left the right arrow button to set the value. set take effect after the computer restarts.
% I) r6 a G7 V, a- h [) ? Dock Configuration configuration 4 f* R* }8 l- S) U
Docking Status docking station docking station status
v4 o/ u. t( X% m: g( O Universal Connect common interface: If the operating system used to WinNT4.0 or earlier version, this setting is invalid. If you regularly use more than one Dell docking device, docking station and want to minimize the time of the initial access time, is set to a new docking device to generate a new file system settings, set to (s) hard drive password * N* r+ K" j+ A
Password Status
. A1 @8 k9 r* o+ w: O9 K- o! o Password Status: This option is enabled in the Setup password lock system password. this option is set to changes. This option can also be used to place the password in the system startup is disabled by the user.
$ {# u1 z% Q2 L8 ?4 `# ` System Password System Password
/ R& R* v( e2 \/ U, v. \( A2 C Setup Password Setup Password
! b7 Y$ k7 k" Z% R" j5 a% G Post Hotkeys self hotkey: This option is used to specify Power On Self Test (POST) displayed on the screen when the hot key (F2 or F12).
0 n8 \. Q- W* z7 b2 r$ p. j) z Chassis Intrusion : l0 b4 H- O. ^4 J
chassis intrusion: This option is used to enable or disable the chassis intrusion detection feature. is set to ; when the boot disk if the intrusion detection in the end, do not send a warning message. This option is enabled and the chassis cover is open, the field will display disk drive A: If the system is equipped with a floppy drive,Benefits of 16 new exclusive Windows Vista, Vithal, use this option to enable or disable the floppy drive first principal 3 \% F0 M3 A0 w6 V ~9 D) e
Primary Master Drive I q7 ?* p3 g: G4 V# b
Primary Slave Drive drive drive first from the second main
4 V6 l, z6 k) W# Q, M: d Secondary Master Drive + Q9 m2 p7 _: F. m# G8 {
Secondary Slave Drive drive drive, the second from
% z) r0 b2 L! E9 R/ G( v IDE Drive UDMA support for the IDE UDMA drive: Use this option to enable or disable the internal IDE hard disk interface via DMA transfer.
: P5 [( q c- f+ W! ~, D3 T Hard-Disk drive Sequence hard drive order
' U- @4 f& q- L0 O8 z: j6 Y5 r2 r System BIOS boot devices the system BIOS boot order 2 L! z# Z" d7 @3 m! {8 }
USB device USB memory device 5 U- n6 F* L! N& \% b% E, }" y
Memory Information System Information : S/ A% Q! s4 H2 S, N# \/ }
Installed System Memory RAM: This option displays the installed system memory size and type
) \+ M* P; c/ D" K1 p System Memory Speed ??Memory Speed: This option displays the rate of memory installed
) f- s X( t5 E' e) A System Memory Channel Mode memory channel mode: This option displays the memory slot set. , K7 d0 y- M! x, ?: y+ B: f9 Q% y
AGP Aperture AGP memory region: This option specifies mini usb drive the memory allocated to the value of the video adapter. Some video adapters may require more than the default amount of memory.
* k& I6 U4 Q1 @5 [+ _9 v CPU information CPU information
, t6 o; S. j4 U& t CPU Speed ??CPU speed: This option displays the CPU starts operation Rate
j* F* o4 o" O$ {- j3 W Bus Speed ??Bus Speed: Display Processor bus speed 2 H. n! N" F* L: k' t8 K
Processor 0 ID Processor ID: display processor of the type and model number
1 y8 ~' z5 K5 ] Clock Speed ??Clock $ o: o$ t) ^1 E, p) y
Cache Size Cache value: Display Processor the value of the secondary cache 6 H0 S: @1 X* Z% L) \+ l* z, t* m* |0 m
Integrated Devices (LegacySelect Options) integrated device 6 _. T1 A# ^& x' |+ t. t0 r
Sound sound settings: Use this option to enable or disable the audio controller 3 N U8 \+ w/ l" a4 d4 y$ ?/ @9 M
Network Interface Controller Network Interface Controller: enable or disable the integrated network card
% m' y9 [1 r; x9 E7 e" U Mouse Port mouse port: Use this option to enable or disable the built-in PS / 2 compatible mouse controller # u! w/ n' @$ C9 X0 A
USB Controller USB Controller: Use this option to enable or disable the onboard USB controller. ! Z& H+ N! Y1 X2 `8 J7 a! |
PCI Slots PCI slot: Use this option to enable or disable the onboard PCI slot. disabled all the PCI cards are not available, the operating system and can not be detected. / ^( \6 o- M4 q c2 i8 m
Serial Port 1 , L$ y2 w6 {' x* s9 s
serial port 1: Use this option to control the built-in serial port operation. is set to COM1, then use COM2, if the two addresses have been assigned to a port, the port will be disabled .. ! z( s" M3 ]% t2 |4 `8 I0 y
Parallel Port Parallel Port: This field can be configured built-in parallel port
- n( T/ o# q5 a/ t6 Z/ J Mode
! w) X# ~4 @2 U; }- d mode: Set for the rate of PS / 2 Time / System Time Time / system time
1 N9 V( F+ A( T5 }" e9 T7 I Date / System Date Date / system date 3 c }( b5 t* ^0 c# c
Level 2 Cache secondary cache : {* v6 Q S( t: t, m
System Memory System Memory " |+ U7 P9 ~, B. ]) b5 g
Video Controller Video Controller
/ P' N3 {* c8 J3 |6 y. l Panel Type LCD Model $ h- ~" r3 \7 g1 f. f+ v
Audio Controller Audio Controller
1 x R! b: V2 k6 f6 [; Z' E) E( `3 ` Modem Controller Modem (Modem)
. W/ W6 r5 M t Primary Hard Drive primary hard ' M; `4 T4 u# {% J
Modular Bay module bay " l& G( ~4 S, y( R
Service Tag Service Tag 9 ~$ U( c+ j, }, z8 g
Asset Tag asset tag 2 W, B( W: O$ Q& K0 T1 K
BIOS Version BIOS Version
& R/ ^2 F1 W: K; o2 r9 ` Boot Order / Boot Sequence Boot Sequence (operating system file system search order)
6 d! A6 ~* j; \8 Z' `4 c1 i Diskette Drive Floppy Drive
5 q( w1 d1 N( R5 U3 e$ X Internal HDD built-in hard disk drive floppy " `4 H! R& _: h0 m
Floppy device Equipment
2 O4 m" g" Q8 j! e& B4 u* f Hard-Disk Drive Hard Drive ( Z" J( F% b v
USB Storage Device USB storage device
2 P5 i1 j! `0 S6 \$ y CD / DVD / CD-RW Drive CD-ROM
) m* \% l1 W8 H, t) e& c) c CD-ROM device drive . a* \% u; Z; H" v3 X
Modular Bay HDD hard drive module
O5 [$ C. t% Y' W, \ ^5 D+ C Cardbus NIC Cardbus bus card 3 A0 j/ e) W% _% z: D+ n4 q
Onboard NIC Onboard LAN 7 G+ H4 j/ t% H% @& T1 @/ X
Boot POST
+ J) S5 G+ R I- B+ A* K' ~ when the Power On Self Test (POST) check the hardware level: set to only in the BIOS upgrade, memory module changes or previous POST did not complete the case to be checked. is set to This option is used to set the system to use a lower voltage power adapter or other configuration is not supported by the alarm, set to > Built-in Modem: Use this option to enable or disable the built-in Modem. disabled (disabled) after the Modem is not visible in the operating system. 5 a( e& o2 C7 i% O* `3 j
LAN Controller
5 e0 L7 L3 @5 u9 r Network Controller: Use this option to enable or disable PCI Ethernet controller. disabled the device in the operating system is not visible.
4 I- w Y: O9 L" M PXE BIS Policy / PXE BIS Default Policy
" b- k- h+ s) U# B PXE BIS Policy: This option controls how the certification system in the absence of treatment (start the whole Service Boot Integrity Services (BIS)) authorization requests. BIS system can accept or reject the request. is set to Onboard Bluetooth Bluetooth
, G8 x. C/ \" W( h0 Y MiniPCI Device Mini PCI device
' `7 ?' k N9 f0 J2 b( s MiniPCI Status Mini PCI Device Status: install the Mini PCI device can use this option to enable or disable the onboard PCI devices
/ ]) M& i7 i6 ^- I Wireless Control
. T5 I8 L k$ b, N Wireless Control: Use this option to set the MiniPCI wireless devices and Bluetooth control. is set to ; when the wireless device can : Use this option to enable or disable wireless devices. The settings can be in the operating system through the Serial Port: This option can be re-assigned port address or disable the port to avoid resource conflicts equipment.
) X) q# R' j$ q Infrared Data Port infrared data port. Use this setting can be re-assigned port address or disable the port to avoid resource conflicts equipment.
9 o2 f [. H" V6 H4 v! T Parallel Mode
7 |$ ~* {" o- Y* p. |/ I/ L1 V) G parallel mode. control the computer parallel port works as peripheral two-way communication) or to error message. 9 P+ i+ k# N' c: w! c
Enable Keypad % z+ P6 A7 l- N3 o, T4 I
keypad enabled: Set to embedded keypad is disabled. + T9 Z |7 w, D
External Hot Key
$ D* ]0 g/ o4 z$ B0 l- s external hotkey: This setting can be an external PS / 2 keyboard in accordance with the use of laptop computers use the same key button. If you use the ACPI operating systems such as Win2000 or WinXP, the USB keyboard can not use the key. only in pure DOS mode, can use USB keyboard keys. is set to disable the feature.
) d+ e+ D& e# a3 l USB Emulation , C. P+ v/ @' i. S W1 g' ^- n# u
USB Simulation: Use this option may not directly support the operating system to use USB USB keyboard, USB mouse and USB floppy drive. The setting in the BIOS boot process automatically enabled. Enable The function, control is transferred to the operating system simulation remain valid. to disable the feature in the control simulation of the transfer to the operating system shut down.
4 h) Y4 i/ \' r* H# \0 z' E; o Pointing Device
7 ~0 U- I% a9 O" q( w7 l1 S6 f pointing device: setting integrated touchpad are enabled and disabled. set to If an external PS / 2 mouse, you can switch between mouse and touch pad. changes take effect after the computer restarts. 2 E; o# X& E; ?$ `/ F$ m2 [
Video Expansion
9 ~2 g9 M! z& e# i8 V, j1 e( U0 U! Y Video Extension: Use this option to enable or disable video extensions, will be lower adjusted to the higher resolution, the normal LCD resolution. 9 ?+ r/ g8 @0 C. n0 Q$ B3 E! |* t
Battery Battery
* l4 b$ b( J0 w$ _& ^+ h: u Battery Status Battery Status - J. o, M9 {5 ~) g5 q
Power Management Power Management
9 u, ~5 N/ g6 W8 F Suspend Mode suspend mode ! [1 P; Y" R3 m, w4 V
AC Power Recovery AC power recovery : This option can be re-inserted back into the AC power adapter when the computer system corresponding reflected.
1 t' ?( C8 L; V+ ]0 w; L1 | Low Power Mode Low power mode: This option is used to set the system sleep or shut down the power consumption.
! g' Y, w2 Z7 Q* [% i; A& l. n' c Brightness
, W6 ~/ C! d. Z+ ~ Brightness: This option can set the display brightness when the computer starts. computer work when the power supply state, the default is set to half. computer work in the AC power adapter is set by default when the state's largest. 5 D$ @& l5 s+ Y" C4 E& `, p
Wakeup Wake On LAN . s0 H. W( f7 \
Network: This option allows access to the network signal when the computer wakes from sleep. The setting of standby mode (Standby state) is not valid. only to wake up in the standby operating system. This setting only then there is the AC power adapter in effect at the time. - Z! p/ Q0 U+ u$ ^
Auto On Mod Auto boot mode: Note that if the AC power adapter is not connected,custom cake toppers, this setting will not take effect. This option can be set to automatically boot the computer time, you can set your computer start automatically every day or only on weekdays automatically boot. setting takes effect after the computer restarts.
& h) l' e8 p5 U% p T/ f; K+ D Auto On Time automatically start time: This option can be set to automatically boot time, a 24-hour time format. type values or use the left and right arrow keys to set the value. setting takes effect after the computer restarts.
" r- \) E, l$ }" x' r Dock Configuration configuration
3 T$ u# J5 \+ K3 F" {% D$ ~ Docking Status docking station docking station status
" i8 b; Z+ S1 i7 _ Universal Connect common interface: If the operating system used to WinNT4. 0 or earlier versions, this setting is invalid. If you regularly use more than one Dell docking device, docking station and want to minimize the time of the initial access time, is set to computer connected to a docking station for each new device to generate a new file system settings,LED Driver IC trends,bobble heads, set to -disk drive password (s) hard drive password 9 J- Q: a* X. }7 o) x8 e
Password Status $ C4 v. V* ]2 t l8 i
Password Status: This option is enabled in the Setup password lock system password. this option is set to Place the system password is changed. This option can also be used to place the password in the system startup is disabled by the user. , r: p+ O Z8 S* N. A L
System Password System Password 1 r- ]0 ^- E6 |
Setup Password Setup Password
+ n0 Z. O4 d# E1 ?1 q8 _+ `- R9 h Post Hotkeys self hotkey: This option used to specify the POST (POST) displayed on the screen when the hot key (F2 or F12). . m6 G- x% i, ]% |" c- f5 R2 D
Chassis Intrusion 6 |% ]' F* m4 {7 N6 Y* n" ~
chassis intrusion: This option is used to enable or disable the chassis intrusion detection feature. is set to ; Enable-Silent Diskette Drive A: disk drive A: If the system is equipped with a floppy drive, use this option to enable or disable the floppy drive ( B0 H9 B" W* e) R) f3 F# I. l
Primary Master Drive the first primary drive
5 N2 e8 b' P! X* B9 A; }7 W p Primary Slave Drive from the drive the first ) }+ o3 Z4 R: P$ J
Secondary Master Drive the second main drive
$ p- ]3 g+ N; @4 Z. w) g Secondary Slave Drive the second from the drive
) k l# E/ n7 @1 T' j1 X IDE Drive UDMA support for the IDE UDMA drive: Use this option to enable or disable the internal IDE hard disk interface via DMA transfer.
- n) b9 H; l( g: E3 O- J" n( j Hard-Disk drive Sequence hard drive in order 2 }. z5 e1 D _; y. r
System BIOS boot devices the system BIOS boot order - g4 S% g* C( v* S) I' m7 b
USB device USB memory device 1 {; z+ Q4 [4 M: O. k, _
Memory Information System Information " z, u! c" \: h9 }& d% e5 H5 l
Installed System Memory RAM: This option displays the system memory size installed in the and model
3 L4 Z+ Y5 g- E1 E' X% w9 o) s System Memory Speed ??Memory Speed: This option displays the rate of memory installed 3 m$ h4 @( c. u$ q; ~6 T9 o+ U
System Memory Channel Mode memory channel mode: This option displays the memory slot set. " C& T) j* I- C( f* C: V8 z
AGP Aperture AGP memory region: the option specifies the memory allocated to the value of the video adapter. Some video adapters may require more than the default amount of memory. / L5 ?# c+ F, {: w9 ?4 r) o1 m4 ]
CPU information CPU information & N7 E1 c+ g1 H e8 b" h+ Q$ v9 ^
CPU Speed ??CPU speed: This option displays the post-central processor running at bus speed 3 X$ u7 o. X4 u) E! p
Bus Speed: Display Processor bus speed : B8 s6 ]2 I: s, ^
Processor 0 ID Processor ID: display processor of the type and model number
0 X- V9 D% m Q4 y* L Clock Speed ??Clock values ??) M9 N3 V% [" @ k8 S2 V
Cache Size Cache : Displays the value of the processor's secondary cache
2 q! h* u4 g9 J5 _* P- } Integrated Devices (LegacySelect Options) integrated device : [3 ?0 j# f( h+ I8 E' L; O
Sound sound settings: Use this option to enable or disable the audio controller
+ o' w9 ?9 h. s3 C6 ~3 G Network Interface Controller Network Interface Controller: Enable or disable the integrated card
' z% I1 r( G/ S: U/ ?5 o$ Y Mouse Port mouse port: Use this option to enable or disable the built-in PS / 2 compatible mouse controller $ A1 W" J9 n! h( e+ @+ `1 R2 N
USB Controller USB Controller: Use this option to enable or disable the onboard USB control device.
! z/ @; W& ~4 Q) j7 X2 O PCI Slots PCI slot: Use this option to enable or disable the onboard PCI slot. disabled all the PCI cards are not available, the operating system and can not be detected.
$ a8 m0 s2 L! y" V1 r8 w) C Serial Port 1 ^# _0 y3 P: l6 U9 k
Serial Port 1: Use this option to control the built-in serial port operation. is set to . serial first use COM1, then use the COM2, if the two addresses have been assigned to a port, the port will be disabled ..
. V% N5 E2 U( d) o, g; q8 Z9 X6 C Parallel Port Parallel Port: This field can be configured built-in parallel port 1 n# J* B1 i5 u: J4 l4 S" m9 F
Mode
6 `, N6 I0 J" h& u4 m8 Z( T mode: set to different. maximum transmission rate of PS / 2 |
|
狗仔卡
发表于 2011-5-17 22:24
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡